MULTI SURFACE PAINT (MSP)
£ 0.00
Only 5 remaining
FEATURES
AND BENEFITS:
Use inside or out
Resists flaking and cracking
Retains gloss for longer
Chalks much less
Water-based
No special thinners required (only water)
Low VOC
Microporous & breathable
Alkali resistant
Resists heat up to 80ºC
Quick drying
Non flammable
Cleans up with water
Saves time and money
Recoatable after 4 hours
Can be used over most other old paints
No primer required* (
*unless on mild steel - use BEDEC Metal Primer, where staining can occur - use BEDEC Stain Block)
No undercoat required
WHAT
IS MSP is a proven, water-based paint that resists flaking or peeling because of its outstanding flexibility. It will go over most other paints and varnishes including weathered Tar Varnish, Bitumen and Creosote. It is non-yellowing and it cleans up with water.
It can be used directly onto plastic, wood, metal (including radiators), plastic coated steel, cladding, brick, masonry, fibreglass, terracotta, stone, plaster, MDF, tiles, melamine, plastics, UPVC, galvanised steel, aluminium, copper and much much more!
Preparation of all surfaces is very important. Shiny surface need to be keyed. Thin the first coat 20-30% with water on porous surfaces.
Coverage: Approximately 13-15 sq. metres per litre, depending on substrate porosity and application method.
Drying times: Dry in 2-4 hours, recoatable after 4 hours.
Coverage: Approximately 13-15 sq. metres per litre, depending on substrate porosity and application method.
Drying times: Dry in 2-4 hours, recoatable after 4 hours.